NEW ARRIVAL

245€ with Coupon for New ATOMSTACK M50 Double Ultra-Fine Compressed Spot Laser Module – BANGGOOD

245€ 654€
Banggood
245€ with Coupon for New ATOMSTACK M50 Double Ultra-Fine Compressed Spot Laser Module – BANGGOOD
245€ with Coupon for New ATOMSTACK M50 Double Ultra-Fine Compressed Spot Laser Module – BANGGOOD
245€ 654€

SaveSavedRemoved 0

ONLY 245€ with our EXCLUSIVE COUPON for New ATOMSTACK M50 Double Ultra-Fine Compressed Spot Laser Module Upgraded Fixed-focus Laser Engraving Cutting Module For Laser Engraver Machine 3D Printer CNC Milling DIY Laser – BANGGOOD

245€ with Coupon for New ATOMSTACK M50 Double Ultra-Fine Compressed Spot Laser Module - BANGGOOD
New ATOMSTACK M50 Double Ultra-Fine Compressed Spot Laser Module Upgraded Fixed-focus Laser Engraving Cutting Module For Laser Engraver Machine 3D Printer CNC Milling DIY Laser
245€ 654€
Banggood
⚡️ NEW 🧡 BANGGOOD 🧡 COUPON ⚡️
*PLEASE NOTE for European Union VAT: Goods purchased with our COUPON and delivered to the destination located in the European Union (EU), VAT and duties (if applicable) have been included in their COUPON prices and there is no need to pay additional taxes.
For more New offers – HERE
For Banggood Coupons see – HERE

Join Our Telegram Channel

Description:
1. The M50 laser module can be installed on any engraver model of the Atomstack A5 series and can be used without any additional setup.
2. If you own other brands of engravers such as Ortur, NEJE, Two-Trees, etc., you can also install our Atomstack M50 laser module, which comes with a free adapter in the box. 
Higher laser power, faster engraving speed! NEW ATOMSTACK M50 50W double ultra-fine compressed spot Laser Module: can be used for laser cutting machine, laser engraving machine, CNC, DIY laser. Upgraded high quality fixed-focus laser, no need to focus. Engraving speed is 200% higher than other 5W lasers.
Specification:
Brand Atomstack
ModelM50
Optical Output Power 9.5-10W
Product Material Aluminum 6061 Anode
Housing Size 44*52*50mm
Circuit Board Size 44*52mm
Circuit Board 12V/PWM Modulation Board
Wire Rod 22# 2P2.54 Terminal Reverse Wire 80mm
Optical Lens φ6/glass
Fan 12V
Laser Beam Mode Spot
Working Mode Pulse Work
Lightspot Size 0.08*0.06mm
Working Time 10000H
Working Temperature 0℃~70℃
Storage Temperature 一40℃~85℃
Sintering Temperature 1000~1200℃
Product Net Weight260g
InstructionsClick Here
Items Symbol Min Typ Max Unit Condition
Optical Output Power Po 9.510W12V Power
Working Current Iop /2.93.2A
Operating Voltage Vop /12/V
Laser Wavelength λp 455460nm
Electric Power Wl /34.838.4W
Features:
1. It can be used for laser cutting machine, laser engraving machine, CNC, DIY laser.
2. Laser protective cover: The laser is equipped with a protective cover to protect the eyes of the user without the need to wear additional protective glasses. At the same time prevent pets from grabbing the laser spot.  
3. Made of aluminum, strong and durable.
4. Upgraded high quality fixed-focus laser, no need to focus.
5. Aviation aluminum TTL driver board with cooling fan can ensure continuous long time work.
6. Engravable materials: wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplating layer and lacquered metal.    
7. Cutable material: cardboard, non-woven fabric, veneer, acrylic, some thin plastic board.
8. 0.08*0.15mm double compression spot light coupling technology makes engraving more powerful 
and precise .
9. Engraving speed is 200% higher than other 5W lasers.
10. High energy can cut 8.5mm thickness plates at one time.
11. The laser sintering temperature is 1100 degrees, the effect of engraving metal is better.
12. The laser has a built-in horizontal gyroscope anti-tip protection device, and it stops working when the tilt angle is 20°.
13. The wind-collecting hood can clean the dust to protect the lens to avoid laser energy attenuation.
14. The transfer circuit board is compatible with 95% of laser engraving machines on the market,Including Atomstack, ortur, Neje, twotree, etc.
CAUTIONS:
1. The laser light emitted by the laser module is likely to injure persons’eye, so do not directly gaze its end surface and wear appropriate safety glasses to prevent laser light when it is working.
2. Laser module needs an appropriate laser driver(PCB). When the laser module connects with power supply, please set the output voltage to zero.  The adjustment of the current should be slowly increased or decrease to avoid damaging the device.
3. Keep the device working or storing in a dry environment. The anti-dust grade is over one million, in order to prevent dust inside the lens to affect the laser dot shape.
4. Working at high temperatures will increase the threshold current, reduce conversion efficiency and speed up the aging of the device.
5. When output power is higher than it’s specific parameter of operation, it will accelerate the aging of the device.
6. When the operation temperature of the laser diode is over 70degree, please do well heat dissipation of it.
7. This laser module is an electrostatic sensitive device. Please make sure ground yourself or wear an antistatic wrist strap before you take it.
8. 0.08*0.06mm double compression spot light coupling technology makes engraving more powerful and precise .
9. Engraving speed is 200% higher than other 5W lasers.
10. High energy can cut 8.5mm thickness plates at one time.
11. The laser sintering temperature is 1200 ℃, the effect of engraving metal is better.
12. The wind-collecting hood can clean and dust to protect the lens to avoid laser energy attenuation.
13. The transfer circuit board is compatible with 95% of laser engraving machines on the market,Including Atomstack, Ortur, Neje, Twotree, etc.
1 x  M50 Laser Module
1 x  PCB Circuit Board
1 x  Compatible Plate
1 x Fixed Focus Plate
1xConnection Line
1 x Wrench
6 x  Screws
1 x  Power Supply

 

Coupons Price History

Price History for New ATOMSTACK M50 Double Ultra-Fine Compressed Spot Laser Module Upgraded Fixed-focus Laser...

 

OLD COUPONS

Here we publish the expired coupons, but you can try them anyway (from the oldest to the newest): NONE

 

ID:1870478 – SKUI14319

NCBG1870478CN
Kupon4U.com
Logo
Enable registration in settings - general